To Decrease Speed
When the Electronic Speed Control is set, you can decrease speed by pushing the
SET
-
button.
The driver’s preferred units can be selected through the Uconnect system if
equipped. The speed increment shown is dependant on the chosen speed unit of
U.S. (mph) or Metric (km/h):
U.S. Speed (mph)
• Pushing the SET
-
button once will result in a 1 mph decrease in set speed. Each
subsequent tap of the button results in a decrease of 1 mph.
• If the button is continually pushed, the set speed will continue to decrease until
the button is released, then the new set speed will be established.
Metric Speed (km/h)
• Pushing the SET
-
button once will result in a 1 km/h decrease in set speed. Each
subsequent tap of the button results in a decrease of 1 km/h.
• If the button is continually pushed, the set speed will continue to decrease until
the button is released, then the new set speed will be established.
Accelerating For Passing
Push the accelerator as you would normally. When the pedal is released, the vehicle
will return to the set speed.
OPERATING YOUR VEHICLE
47
Summary of Contents for RENEGADE 2016
