Jeep Patriot Manual Download Page 29

Page: 29 / 425

For vehicles not equipped with the EVIC the Auto
Unlock Feature can be enabled or disabled by performing
the following procedure:

1. Close all doors and place the key in the ignition.

2. Cycle the ignition switch between LOCK and ON and
back to LOCK 4 times ending up in the LOCK position.

3. Depress the power door unlock switch to unlock the
doors.

4. A single chime will indicate the completion of the
programming.

NOTE:

Use the Auto Door Locks and Auto Unlock

features in accordance with local laws.

Ignition Key Position

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for Patriot










































































































































































































































































































































































































































Search results

Summary of Contents for Patriot

Reviews:

Jeep Patriot, Manual, Page: 29 / 425

Search results

Summary of Contents for Patriot

Reviews: