A . RUBICON® S TEEL BUMPERS, FRONT.
Steel-reinforced
and winch-capable. Removable ends allow conversion to
a high-clearance, narrow-profile bumper. Choose long or
short configuration. Three-piece bumper (shown) comes
equipped with Red Tow Hooks and Fog Lights. One-piece
bumper comes equipped with Red Tow Hooks and must be
used with the production Front Bumper Skid Plate, sold
separately.
[ 82215121AE – Three-Piece Assembly ] [ 82215120AB –
One-Piece Assembly ] [ 82215115AB – Front Bumper End Caps ]
B. RUBICON S TEEL BUMPER, RE AR.
( 1 )
Rear off-road bumper
is the same as the production rear bumper and matches
the Rubicon® Front Steel Bumper. Bumper is steel with
Black e-coated finish.
[ 82215634AC ]
C. JEEP
®
PERFORMANCE PAR T S OFF -ROAD BUMPER.
( 2 )
Designed to take on whatever the trail can throw at
it. Wide enough to provide fender protection but is
narrower than the production bumper. Heavy-duty
design is rigourously tested for performance, durability
and corrosion. Bumper is steel e-coated and Black
powder-coated with D-rings for additional off-road
functionality.
[ 82215691AD ]
D. FRONT BUMPER SK ID PL ATE.
Designed to fit under the
front bumper and is the same as the production Rubicon
Skid Plate. For use with the production steel front bumper or
the Jeep
®
Performance Parts Off-Road Bumper.
[ 82215183AB ]
Not all part numbers shown. See retailer for additional part numbers by vehicle application.
(1)
Not compatible with Park-Sense.®
(2)
Jeep Performance Parts, including Lift Kits, are
designated as “Off-Road Only” parts and have not been evaluated or tested for
crashworthiness or compliance with safety standards. Jeep Performance Parts noted as
“Off-Road Only” are aftermarket only, may not be installed by a Chrysler, Dodge, Jeep, Ram or
FIAT® retailer on a new vehicle, and may not be sold or financed in conjunction with the sale of
a new vehicle. FCA Canada Inc. does not authorize the installation of any part noted as
“Off-Road Only” on any vehicle prior to its first retail sale.
A
C
B
D
