Jeep Jeep Wrangler Owner'S Manual Download Page 31 | Manualshive

Page: 31 / 448

Jeep Jeep Wrangler Owner'S Manual Download Page 31

WARNING!

•

For personal security reasons and safety in an
accident, lock the vehicle doors when you drive as
well as when you park and leave the vehicle.

•

Never leave children alone in a vehicle. Leaving
children in a vehicle unattended is dangerous for a
number of reasons. A child or others could be
seriously or fatally injured. Do not leave the keys
in the ignition. A child could operate power win-
dows, other controls, or move the vehicle.

Power Door Locks — If Equipped

The door lock switch is located on each front door panel.
Press the switch downward to lock the doors, and
upward to unlock the doors.

Power Door Lock Switch

30

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
29
30
31
32
33
...
»

Summary of Contents for Jeep Wrangler

































































































































































































































































































































































































































































Reviews:

No comments