Forward Collision Warning With
Mitigation
The Forward Collision Warning (FCW) system
with mitigation provides the driver with audible
warnings, visual warnings within the instru-
ment cluster display to warn the driver when it
detects a potential frontal collision. The warn-
ings and limited braking are intended to pro-
vide the driver with enough time to react, avoid
or mitigate the potential collision.
Turning FCW ON Or OFF
The forward collision button is located in the
Uconnect display in the controls settings. To
turn the FCW system OFF, press the forward
collision button once to turn the system off.
Press the button again to turn the system on.
The FCW feature has three settings and can be
changed within the Uconnect System Screen:
• Far
• Near
For
further
information,
and
applicable
warnings and cautions, please refer to the
Owner’s Manual at www.mopar.com/en-us/care/
owners-manual.html
(U.S.
Residents)
or
www.owners.mopar.ca (Canadian Residents).
LaneSense — If Equipped
The LaneSense system is operational at speeds
above 37 mph (60 km/h) and below 112 mph
(180 km/h). The LaneSense system uses a
forward looking camera to detect lane markings
and measure vehicle position within the lane
boundaries.
Turning LaneSense ON Or OFF
The default status of LaneSense is “OFF”. The
LaneSense button is located on the switch
panel below the Uconnect display.
LaneSense Warning Message
The LaneSense system will indicate the current
lane drift condition through the instrument
cluster display. The instrument cluster display
will provide a visual warning depicting the un-
intentional lane departure.
When both lane markings are detected and the
driver unintentionally drifts out of the lane (no
turn signal applied), the LaneSense system
provides a haptic warning in the form of torque
applied to the steering wheel to prompt the
driver to remain within the lane boundaries.
The driver may manually override the haptic
warning by applying torque into the steering
wheel at any time. When only a single lane
marking is detected and the driver unintention-
ally drifts across the lane marking (no turn
signal applied), the LaneSense system provides
a visual warning through the instrument cluster
display to prompt the driver to remain within
the lane. When only a single lane marking is
detected, a haptic (torque) warning will not be
provided.
SAFETY FEATURES
