Jeep Compass, Owner'S Manual

Page: 97 / 439

When calling a number with your UConnect
威
system
that normally requires you to enter in a touch-tone
sequence on your cellular phone keypad, you can press
the VOICE RECOGNITION button and say the sequence
you wish to enter, followed by the word
⬙
Send.
⬙
For
example, if required to enter your PIN followed with a
pound, (3 7 4 6 #), you can press the VOICE RECOGNI-
TION button and say,
⬙
3 7 4 6 # Send.
⬙
Saying a number,
or sequence of numbers, followed by
⬙
Send,
⬙
is also to be
used for navigating through an automated customer
service center menu structure, and to leave a number on
a pager.
You can also send stored UConnect
威
phonebook entries
as tones for fast and easy access to voice mail and pager
entries. To use this feature, dial the number you wish to
call and then press the VOICE RECOGNITION button
and say, “Send.” The system will prompt you to enter the
name or number and say the name of the phonebook
entry you wish to send. The UConnect
威
system will then
send the corresponding phone number associated with
the phonebook entry, as tones over the phone.
NOTE:
•
You may not hear all of the tones due to cellular phone
network configurations. This is normal.
•
Some paging and voice mail systems have system time
out settings that are too short and may not allow the
use of this feature.
Barge In - Overriding Prompts
The “Voice Recognition” button can be used when you
wish to skip part of a prompt and issue your voice
recognition command immediately. For example, if a
prompt is asking
⬙
Would you like to pair a phone, clear
a...,
⬙
you could press the VOICE RECOGNITION button
and say,
⬙
Pair a Phone
⬙
to select that option without
having to listen to the rest of the voice prompt.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 95
3