Jeep 2010 Patriot Owner'S Manual Download Page 219

Page: 219 / 496

•

DISC Play/Pause -

You can toggle between

playing the DVD and pausing the DVD by
pushing the SELECT button (if equipped).

•

DVD Play Options -

Selecting the DVD Play Options

will display the following:

•

Subtitle – Repeatedly pressing SELECT will switch
subtitles to different subtitle languages that are
available on the disc (if equipped).

•

Audio Stream – Repeatedly pressing SELECT will
switch to different audio languages (if supported on
the disc) (if equipped).

•

Angle – Repeatedly pressing SELECT will change
the viewing angle if supported by the DVD disc (if
equipped).

NOTE:

•

The available selections for each of the above entries
varies depending upon the disc.

•

These selections can only be made while playing a
DVD.

•

VES™ Power -

Allows you to turn VES™ ON and

OFF (if equipped).

•

VES™ Lock -

Locks out rear VES™ remote controls (if

equipped).

•

VES™ CH1/CH2 -

Allows the user to change the

mode of either the IR1 or IR2 wireless headphones by
pressing the AUDIO/SELECT button (if equipped).

•

Set Home Clock -

Pressing the SELECT button allows

you to set the clock. Turn the TUNE/SCROLL control
knob to adjust the hours and then press and turn the

218

UNDERSTANDING YOUR INSTRUMENT PANEL

Summary of Contents for 2010 Patriot

















































































































































































































































































































































































































































































































Search results

Summary of Contents for 2010 Patriot

Reviews:

Brands by name

Popular brands

Jeep 2010 Patriot, Owner'S Manual

Search results

Summary of Contents for 2010 Patriot

Reviews:

Brands by name

Popular brands