Jeep 2010 FJ Cruiser Manual Download Page 171

Page: 171 / 431

173

2-4. Using other driving systems

Wh
en
drivin

Clutch start cancel switch (vehicles with a manual transmission)

■

Clutch start system

The system is designed to keep the starter motor from operating if the clutch
pedal is not depressed all the way down.

The switch allows the vehicle to be driven out of difficult situations
by cranking the engine with the clutch engaged.

Never use the switch for normal engine starting. Be sure to follow the
starting procedure. (

→

P. 126)

Press the CLUTCH START
CANCEL switch to cancel the
clutch start system with the
engine switch is turned to the
ON position.

The indicator will come on
when the clutch start system is
canceled.

The  clutch  start  cancel  switch
is  automatically  turned  off
when  the  engine  switch  is
turned off.

Summary of Contents for 2010 FJ Cruiser
















































































































































































































































































































































































































































Search results

Summary of Contents for 2010 FJ Cruiser

Reviews:

Brands by name

Popular brands

Jeep 2010 FJ Cruiser, Manual

Search results

Summary of Contents for 2010 FJ Cruiser

Reviews:

Brands by name

Popular brands