© Jeds Peds
More! More! Moore!
Pag
e
22
If you want to use this method, and wire it all manually, then you can start to box up your circuit as
its easier and neater to finish this off inside the enclosure so you can snip your wires to length. Take
your time and think each stage through methodically.
Cut your wires to length before you solder them, remember check twice, cut once, solder once.
Using the Foot Switch and its PCB
Whilst its completely your own choice which method
you use, I do suggest this as it is neater and less
confusing.
The PCB is double sided, and here are pictures of both sides.
Side 1
Side 2
Eventually side two will face out of the enclosure.
