There are loads of ways to wire up the footswitch. I use this one, I always have. Its never let me
down and is easy to hook up.
The 2k2 resistor can be any value up to 4k7. You will have a spare in the kit to use.
Good luck and happy soldering!
PCB Design Notes
1.
All PCBs are designed by ourselves, and tested before sale.
2.
Box caps are shown with a + polarity mark on the silk screen, this is irrelevant as the box
caps are non-polarised so can go either way.
3.
Spare ground points may be provided on the PCB layout, use them if you wish but there is
no requirement to.
