To help you a little further with ensuring the orientation of your switch is correct. To compare both
3PDT images you would have this…
Pin 1
–
Empty
Pin 2
–
Ground
Pin 3
–
LED
Pin 4
–
Pin 7
Pin 5
–
Input Jack tip
Pin 6
–
PCB Input
Pin 7
–
Pin 4
Pin 8
–
Output Jack Tip
Pin 9
–
PCB Output
There are loads of ways to wire up the footswitch. I use this one, I always have. Its never let me
down and is easy to hook up.
Please make sure you
get the switch the
correct way!
The pins on the switch must run left to
right like this, so the top row of pins would
be 1, 4, and 7.
If you put it in with 1, 2, and 3 across the
top row you are wrong.
