Jedmed S-II, Operating And Service Manual, Page: 25 / 30

FIXED FOOTREST
WITH MOTORIZED LIFT BASE
FIXED FOOTREST
WITH MANUAL LIFT BASE
10
11
9
3
2
4
7
1
8
5
6
21
7
15
19
22
13
25
ASSEMBLY INSTRUCTIONS
1. MARK AND DRILL THE LIFT BASE MOUNTING HOLES USING A 3/8" DRILL AND TEMPLATE 502-T001 (MANUAL BASE)
OR 502-T002 (MOTORIZED BASE). NOTE, LOCATE PUMP ARM OR PEDALS ON THE RIGHTHAND SIDE OF CHAIR
(WHEN SEATED) 90 DEGREES FROM THE SINGLE REAR MOUNTING HOLE. ROTATE RUBBER EDGING ON THE
MOTORIZED BASE SO POWER CORD COMES OUT IN BACK; HOWEVER, OFFSET IT BY 5 DEGREES SO THE
MOUNTING HOLE IS NOT BLOCKED.
2. ATTACH MOUNTING PLATE TO LIFT BASE (USE CENTER BOLT FOR MOTORIZED BASE)
3. BOLT CHAIR FRAME TO MOUNTING PLATE (BEFORE ASSEMBLING MOUNTING PLATE USE A 5/8" COUNTERBORE
AND REMOVE PAINT ON CHAIR FRAME AT FRONT TWO HOLES (FOR GROUNDING BENEATH BOLT HEAD) FOR MOTORIZED BASE)
4. MAKE AND INSTALL GROUND WIRE (MOTORIZED BASE ONLY, SEE PAGE 2)
5. INSTALL BACKREST LINKAGE (USE LOCTITE ON LINKAGE SCREW)
6. INSTALL SEAT CUSHION AND GAS SPRING RELEASE PLATE
7. INSTALL BACKREST CUSHION
8. INSTALL LIGHT (OPTIONAL)
9. INSTALL BACKREST PLASTIC SHROUD
10. INSTALL HEADREST
11. INSTALL LEVER GRIPS
12. TEST/ADJUST GAS-SPRING AS NECESSARY
13. INSTALL ALL LABELS
20
14
18
17
16
12
MOTORIZED LIFT BASE
22
25
27
20
LABEL LOCATIONS (TYP.)
23
24
26
BOTTOM VIEW (CROPPED) WITH BASE REMOVED
BACKREST
LINKAGE
SCREW
REAR VIEW (CROPPED) WITH PLASTIC COVER REMOVED
27
28 1 1 -- PMNL084 INSTRUCTION MANUAL (NOT SHOWN)
27 AR AR K601002 -- THREADLOCK: RED #271 (PERMANENT) OR EQUIVALENT
26 - 1 -- 184A-AW003 LABEL: "TO REMOVE CHAIR FROM BASE....."
25 1 1 K701005 LAB 111 LABEL: "THIS BASE SHOULD BE SECURELY...."
24 1 1 -- 502-AW001 LABEL: SERIAL NUMBER (ALL VERSIONS)
23 1 1 -- LAB 113 LABEL: "UNDER PENALTY OF LAW...."
22 1 1 -- LAB 019 LABEL: "JEDMED"
21 2 2 KA04010 -- LEVER GRIP
20 3 3 KA01006 -- HOLE PLUG: 0.375", NICKEL PLATED STEEL
19 4 4 K119027 -- LOCKNUT: M8 (1.25MM/THD), HX, NYLOK INSERT, Z
18 - 1 K120032 -- FW: M10, 10.5MM ID, 30.0MM OD, ZINC
17 - 1 K120033 -- LW: M10, SR, SS
16 - 1 K117028 -- MS: M10 X 20MM (1.5MM/THD), HX HD, BO
15 1 - K300466 502-006 MOUNTING PLATE: 0°, F/ MANUAL BASE
14 - 1 K300465 502-005 MOUNTING PLATE: 0°, F/ MOTORIZED BASE
13 1 - 04-1330 -- LIFT BASE: MANUAL
12 - 1 04-1332 -- LIFT BASE: ELECTRIC, 115V
11 4 4 K117038 -- MS: M4 X 16MM, OVAL HD, PH, SS
10 1 1 KA08018 502-004 HEADREST CUSHION F/ S-II, J-II & L (SPECIFY COLOR)
9 1 1 K905004 -- HEADREST BRACKET
8 4 4 K117037 -- CS: M8 X 25MM, HX HD, BLUE
7 8 8 K117031 -- CS: M8 X 20.0MM, SERRATED FLANGE, HX, Z
6 2 2 K117034 -- CS: M8 X 40.0MM, SERRATED FLANGE, HX, Z
5 4 4 K117033 -- CS: M8 X 35.0MM, SERRATED FLANGE, HX, Z
4 1 1 K905003 -- FOOT RING
3 1 1 KA08016 502-002 BACKREST CUSHION F/ S-II, J-II & L (SPECIFY COLOR)
2 1 1 KA08015 502-001 SEAT CUSHION F/ S-II, J-II & L (SPECIFY COLOR)
1 1 1 K905017 -- METAL FRAMEWORK TOP COMPLETE
ORDER QTY. ITEM NO.
04-1550
MANUAL
04-1555
ELECTRIC
115V
LOT NO. PART NO. DWG. NO. DESCRIPTION
BILL OF MATERIALS
QUALITY NOTICE --CONFIDENTIAL & PROPRIETARY--
DO NOT SCALE
THIS DESIGN IS THE PROPERTY OF JEDMED INSTRUMENT CO.;
ANY UNAUTHORIZED REPRODUCTION OR USE IS STRICTLY
PROHIBITED.
ALL MATERIAL AND WORKMANSHIP TO BE SUITABLE
FOR MEDICAL ENVIRONMENTS, APPLICATIONS, AND/
OR EQUIPMENT WHICH MAY BE USED IN SURGERY.
MULTIPLE
PART #
5416 JEDMED COURT
ST. LOUIS, MO 63129-2221
(314) 845-3770 FAX [314] 845-3771
INSTRUMENT COMPANY
11 X 17 (B)
M. GODFREY
MATERIAL
FINISH
DRAWN BY
APPROVED BY
DATE
DATE
SHEET SIZE
TITLE
DRAWING #
DIMENSIONS
[mm] in
SHEET_______OF_______
REV
06-14-05
--
--
ASS'Y: J-II CHAIR
(ALL VERSIONS)
502-AY002
1 2
DATE REV ECO#/DESCRIPTION DR AP
0
RELEASE STAMP
J-II CHAIR