Jedmed J-II, Operating And Service Manual, Page: 9 / 30

S-II & J-II Chairs
Operating / Service Manual
8
S-II & J-II Chairs
Operating / Service Manual
9
1. Headrest Height Adjustment
*Unlock position by rotating handwheel counter-clockwise.
*Raise or lower headrest to new desired position.
*Lock position by rotating handwheel firmly clockwise.
2. Headrest Tilt Adjustment
*Loosen by rotating lever counter-clockwise
*Tilt headrest to desired position.
*Tighten by rotating lever clockwise.
Once tight, lever may be rotated to a new position by pulling directly
outward on lever near center hub. Rotate to new position and release to
lock.
IDENTIFICATION / OPERATION
3. Recline Lever
*Place hand behind backrest cushion to support patient in chair.
*Using other hand, push down on Recline Lever.
*Move chair backrest to desired recline position.
*Release Recline Lever to lock backrest position.
Note: To raise a reclined patient, weight must be removed from the backrest.
The gas-spring will return the backrest to the upright position.
Do not tighten handwheel if
headrest is completely removed
from chair. Damage to lock
mechanism may result.
CAUTION

4. Armrests
*Armrests are designed to lower automatically as
chair is reclined.
*Armrests may be rotated out of the way for ease
of patient entry, by simply raising upward.
Rotated Armrest
WARNING
!
Do not release Recline Lever unless backrest is
supported. Patient and/or user injury may result.