
Current instructions at www.jeco-inc.com
1-800-893-3006
Page 2 of 3
To Assemble:
Step 1:
Carefully attach the pump (C) to the hose from the top Urn (A), making sure to
place the pump in the center of the bottom basin (B).
Step 2:
Fill the basin (B) with clean water, making sure the pump (C) is fully submerged.
Note:
The maximum water level should be approximately 1.2 inches below the top edge
of the basin (B).
Step 3:
Finally, connect the plug of pump (C) to a GFCI outlet.
WARNING:
Always disconnect the pump (C) before placing your hands in the water.