Current instructions at www.jeco-inc.com
1-800-893-3006
Page 3 of 4
Step 4:
Attach the metal flamingo (C) to the bottom rock (B).
Step 5:
Fill the basin (B) with clean water, making sure the pump (C) is fully submerged.
Note:
The maximum water level should be approximately 1.2 inches below the top edge of
the basin (B).
Step 6:
Finally, connect the plug of pump (D) to a GFCI outlet.
WARNING:
Always disconnect the pump (D) before placing your hands in the water.
