Current instructions at www.jeco-inc.com
1-800-893-3006
Page 2 of 3
To Assemble:
Step 1:
Attach the pump handle (A) to the pump (B), using the plastic screw to fix it.
Step 2:
Route the pre-assembled water hose on the top pump (B) to the bottom (C).
Step 3:
A:
Attach the pump (D) to the hose, making sure to place the pump in the center of the
bottom (C).
B:
Carefully connect the LED lights (E) to the light cable comes out from pump (D),
making sure both parts connect securely.
Step 4:
Fill the basin (C) with clean water, making sure the pump (D) is fully submerged.
Note:
The maximum water level should be approximately 1.2 inches below the top edge of
the basin (C).
