INSTRUCTION
1. This equipment built-in filter sponge, filter material boxed, UV lamp
and water pump. This equipment adopt reasonable water channel,
suitable for both indoor, outside pond garden, aquatic breeding, clean
water sterilization and water fountains.
2. Through the working of water pump, water flow from the filter cover
to filter sponge, and then to the UV lamp. Inside of the UV lamp, the
harmful bacteria and algae will be killed. Then the water flow to
outside finally.
3. The UV lamp was designed as a closed device, no UV will scattering.
And UV light 253.7nm will kill the harmful bacteria and algae to keep a
good condition of water.
TECHNICAL PARAMETER
Model
Voltage
I or Power
UV Power
H-Max
Q-Max
UFP-1000
110-120V60H
z
0.28A
9W
1.6M
1000L/H
UFP-2000
110-120V60H
z
0.68A
13W
2.0M
2000L/H
UFP-1000
220-240V50H
z
25W
9W
1.6M
1000L/H
UFP-2000
220-240V50H
z
50W
11W
2.0M
2000L/H
INSTALLATION AND MAINTENANCE
Please switched off the electrical power when you clean the inside or change
the UV pump. When clean the inside or change the UV lamp, please take
below part list as your reference.
INSTALLATION
MAINTENANCE
Maintenance for filter sponge and filter material:
1. First ,anti-clockwise direction take off the fountain set, open the two clips
on the side of the filter basket, then you can open the filter basket.
2. Take out the filter sponge and filter material boxes , clean and/or change
these.(suggest clean the filter sponge every week)
3. if the bio ball is seriously polluted, it should be washed in the water in the
pool,to preservation of microbial and biochemical properties on biochemical
balls.
MAINTENANCE FOR UV-LAMP
1. Take out the UV lamp for the unit, unload the screw and take out lamp
holder.
2. Open the screw, turn the lamp holder and take out lamp holder
components.