Turn on the power , more than 25 seconds no touch control button, the LED to micro
bright, the controller enter the screen saver mode; the led return to normal When press
any button.
Five, Date memory function
Memory function, ensure that the pump rework upon keeping the same parameter.
Six, Fault code and description
The fault code abnormal and flashing when the controller abnormal work, the code
explanation is as below:
Er01:
Abnormal Working current
;
Check if the pump short of voltage or the controller
broken
Er02:
Controller overheating; Check whether the controller exposed to the sunshine or
in high temperature environment
Er03:
Pump idling
;
Check the pump work dry
Er04:
The impeller stops running; Check if the pump short of voltage or the controller
broken
Er05:
Abnormal Working voltage. Check the input supplying voltage
●
Note: for indoor use, the power socket must be installed with the leakage current
protecting device, and the leakage current shall not exceed 30mA (please the consumer
to install the leaking current protection device by themselves).
Performance Parameters Table
No:
Model No:
Voltage
Control box (W)
Consumption
(W)
Flow rate
(L/H)
Head Max (M)
1
DCP-2500
DC 24V
DCP-2500
23
2500
2.5
2
DCP-3000
DC 24V
DCP-3000
25
3000
3.0
3
DCP-4000
DC 24V
DCP-4000
32
4000
4.0
4
DCP-5000
DC 24V
DCP-5000
40
5000
4.0
5
DCP-6500
DC 24V
DCP-6500
55
6500
4.5
6
DCP-8000
DC 24V
DCP-8000
65
8000
5.2
7
DCP-10000
DC 24V
DCP-10000
80
10000
6.0
8
DCP-15000
DC 24V
DCP-15000
105
15500
7.0
9
DCP-18000
DC 36V
DCP-18000
130
18000
9
10
DCP-20000
DC 36V
DCP-20000
165
20000
9.5
WARNING
l
Do not connect to any other power supply over the rated voltage
l
Do not put the pump in the flammable liquid.
l
Do not use the pump in the water temperature above 35 .
l
Maximum water depth 1.5M
l
Maximum head Max please see the parameter table.
l
Do not immerse the plug into water or other liquid.
l
This appliance is not allowed to use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety.
l
Children should be supervised to ensure that they do not play with the
appliance.
l
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
CAUTION
Always disconnect the pump from the power supply before cleaning, maintenance and
handling.
Do not let the pump work dry.
Do not lift the pump by holding the power cord only
Do not use the pump in the heating liquid.
The pump suitable for both fresh water and sea water
The pump can used as submersible pump and used as non-submersible, pump house
must be filled with water.
The pump can not run in the swimming pool.
Automatic shut off if no water for 2 minutes.
Pull the plug out, and re-insert for resuming work
Operation
A clogged or dirty intake screen will reduce the performance.
If the pump is used on a dirty surface, raise it slightly to reduce the amount of debris
contacting the intake. If the flow is low, please adjust the regulator on the sealing cover.
Do not let the pump run in dry. The pump will be broken easily. Normally, put the
pump into water, plug on. At the beginning, it probably can’t pump water, because
