Preliminary Specifications and Inventory - Subject to modification - July 2011.
TRIM LEVEL PREFERENCE
•
Vertical stainless steel door
for fridge compartment
•
1 Harken 46.2 Electric winch
on the coachroof for halyards and control lines, 12v
•
Linear drive unit for aft platform
motorises raising and lowering platform
•
Dock water inlet
with pressure regulator. Allows the use of onboard systems without using water in the
tanks when at the dock
PACKS
electronic
pack
•
1 Transducer
for speed and depth in the hull
•
1 Wind sensor
at masthead
•
1 Raymarine st70 display
at starboard helm
•
1 Raymarine st70 display
on the cockpit table
performance
plus
pack
•
Below deck genoa furler
with furling line led to cockpit
•
140% Genoa
triradial cut Mylar/taffeta X-Grid laminate in grey
•
Mainsail
full-batten, triradial cut Mylar/taffeta X-Grid laminate in grey
•
Hydraulic backstay adjuster
with linear ram
•
Long genoa tracks on side decks
with ball-bearing cars and control lines led aft to cockpit
•
Upgraded genoa winches
70.2 self-tailing winches (note: electric winches remain in 60.2 size)
•
Folding propeller
Flex-o-Fold
•
Standing rigging
is Dyform discontinuous wire rigging
•
Running rigging
is low-stretch Dyneema
performance
self
-
tacking
pack
•
Self-tacking jib
triradial cut Mylar/taffeta X-Grid laminate in grey
•
Mainsail
full-batten, triradial cut Mylar/taffeta X-Grid laminate in grey
•
Hydraulic backstay adjuster
with linear ram
•
Track for jib
in front of the mast with ball-bearing car
•
Folding propeller
Flex-o-Fold
•
Standing rigging
is Dyform discontinuous wire rigging
•
Running rigging
is low-stretch Dyneema
MAST AND SAIL
•
Running rigging for asymmetrical spinnaker / code 0
includes:
- 2 sheets
- 1 halyard
- 1 downhaul
- Turning blocks for mast base and sidedecks
•
Running rigging for symmetrical spinnaker
includes:
- 2 sheets
- 2 guys
- 1 halyard
- Track and inboard end car for the front of the mast
- Blocks for running rigging
- Spinnaker pole that stores on the mast
•
Releasable forestay
for staysail (option not compatible with self-tacking jib)
•
Furling mast
aluminium mast with double spreaders (option not compatible with Performance packs)
•
2 Harken 60.2 Electric winches
located near helm consoles for genoa and mainsheets, 12V
•
Code 0
with continuous line furlerand 2:1 halyard. Designed for light air use for beam and broad reaching.
The sail is made of a Mylar/Aramid laminate
•
Windex 15
DECK AND HULL
•
Teak battens on cockpit floor
•
Teak deck
•
Wooden rubrail
located just below deck edge
•
Painted hull
for colour selection see price list
EXTERIOR EQUIPMENT
•
Bracket for outboard motor
mounted on pushpit
•
Folding teak cockpit table
replaces GRP cockpit table with all the same functions
•
Composite steering wheels
black, replaces standard wheels
•
Bow thruster
24V 11.5HP with separate 24V OPTIMA REDTOP battery bank
EXTERIOR CANVAS
•
Wide sprayhood
in Sunbrella
®
•
Protective covers for steering wheels
•
Protective cover for cockpit table
•
Large 4 bow cockpit bimini
with viewing ports above each helm that can be folded back and out of the
way when not in use.
•
Cockpit cushions
with closed-cell foam and covered in Sunbrella
®
PASSERELLE AND LADDERS
•
Boarding ladder
for lifeline gates
•
Hydraulically operated gangway
on transom
