Tie Down System
The Move LIte is not approved to be used with any tie down system, generally used to transport
a seated user and power chair in a motor vehicle.
● Never sit in the Move Lite while in a moving vehicle. In an accident or sudden stop you
may be thrown from the Power Chair.
● Never transport the Move Lite in the front seat of a vehicle. It may shift and interfere with
the driver.
● Always secure the Move Lite so that it cannot roll or shift.
Maintenance
To maintain performance, we recommend you take the Move Lite two to three times per year.
Check the follow areas.
● Frame: Loose screws and tighten as necessary
● Wheels: make sure they rotate easily. Significant resistance may require new bearings.
● Armrests: looks for excessive wear
● Work: Replacement parts and more major maintenance issues should be done by
professional. We recommend you do not do this work on your own.
Operation
Controller Settings
Make sure to get familiar with the controller settings and touch sensitivity of the joystick. The
joystick controls speed, braking, and direction while you are travelling.
Power down when not in use
Always power-down your Move Lite when you are parked - even for a short moment. This will
prevent:
● Accidental movement from contact with the joystick
● Unintended brake release or movement from EMI sources
Make sure that persons around you area aware of the joystick, unintended contact can cause
movement and injury to unsuspecting bystanders.
Reaching or Lean
Take special care when reaching or leaning out from the Move Lite. Reaching or leaning can
affect your center of balance, and if done improperly can cause a fall or tip-over.
When in
JDY Imports
323-522-5817
Page 6
