Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced
and folded in order to obtain a booklet A5 (+/- 148.5 mm
width x 210 mm height). When folding, make sure you
keep the good numbering when you turn the pages of
the I/B. Don’t change the page numbering. Keep the
language integrity.
4
150217
Assembly page 4/8
Fax +32 2 359 95 50
Never use the appliance outside and always place it in a dry
environment.
Never use accessories which are not recommended by the
producer. They could constitute a danger to the user and risk to
damage the appliance.
Never move the appliance by pulling the cord. Make sure the cord
cannot get caught in any way. Do not wind the cord around the
appliance and do not bend it.
Stand the appliance on a table or flat surface.
Make sure the appliance has cooled down before cleaning and
storing it.
Make sure the cord never comes into contact with the hot parts of
the appliance. Never touch the hot parts of the appliance.
Make sure the appliance never comes into contact with
inflammable materials, such as curtains, cloth, etc. when it is in
use, as a fire might occur. Keep a distance of at least 1 metre
between the appliance and the curtains.
Do not use the appliance for defrosting
food other than bread
slices, and only insert unbuttered slices of bread of which the
thickness does not prevent the bread from coming up. Be
extremely strict about this as toasters are the cause of many fires
when these elementary safety precautions are not observed.
Empty the appliance frequently of breadcrumbs. Make sure the
appliance is always unplugged before emptying it. Check the
“Maintenance and Cleaning” section.
When cleaning the appliance, do not use metallic scourers in
order to avoid any future risk of electric short circuit.
Your appliance must never be switched on through an external
timer or any kind of separate remote control system.
Please note: Should the symbol
be indicated on a certain
surface, you need to be careful when handling the product. This
symbol means: CAUTION, this surface may get very hot during
use.
The symbol
is always put on the surface with the highest
temperature, however the other metallic or non-metallic surfaces
can also become very hot during use and it is therefore advisable
to always handle them with care and if possible with the help of
isothermal gloves or other thermal protection. In case of doubt
