manualshive.com logo in svg

JDS Uniphase TB9 Series, User Manual

Share
Download
JDS Uniphase TB9 Series User Manual Download Page 5

SD000290 Rev. 500

April 2001

Programming Guide................................................................................................................19

GPIB Interface...............................................................................................................19

GPIB Interface Pin Assignment and Functions..................................................19

RS232 Interface ............................................................................................................20

RS232 Pin Assignment and Functions ..............................................................20

RS232 Driver Pin Assignment .......................................................................................20
Connecting the PC Serial Port to the TB9 Grating Filter ...............................................21
Operation and Query Commands .................................................................................22

Command Parser Rules.....................................................................................22
Operation Commands........................................................................................22
Query Commands..............................................................................................23

Status Reporting and Service Request Control.............................................................24

Status Register ..................................................................................................25
SRQ Mask Register ...........................................................................................25

GPIB Programming Examples.......................................................................................26

Sending Commands ..........................................................................................26
Querying Status.................................................................................................26
Serial Polling the Status Register ......................................................................27
Generating a Service Request Interrupt ............................................................27

RS232 Interface Programming Example .......................................................................28

For sales and service information,

contact JDS Uniphase or your local representative.

JDS Uniphase Corporation

570 West Hunt Club Road

Nepean, Ontario, Canada

K2G 5W8

Phone: 613 727-1303

Fax: 613 727-8284

E-mail: [email protected]

Website: http://www.jdsunph.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Summary of Contents for TB9 Series



































Reviews:

No comments

Brands by name

Popular brands

Load more brands