User ManUal
12
The basic design of the
Westover FBP
probe microscope incorporates an imaging
system, integrated light source, video camera, focus mechanism and magnification
control. The probe is fully assembled and is powered by the display device. The only
assembly required by the user is the connection to the display device and installation
of the appropriate barrel assembly and/or the inspection tip. The FBP analog probe is
equipped with a 4-pin circular Hirose™ connector with notch-keys, which allows for a
secure and firm latch-lock connection to the display device.
Controls
Focus Control
The
focus control
on the probe allows the user to adjust focus manually of the live fiber
end face image on the display.
Magnification
Control
The
magnification control
(available only on dual-magnification probes)
allows the user to
switch between LOW and HIGH magnifications of the fiber end face image.
Dimensions
140 x 46 x 43 mm (5.5 x 1.8 x 1.7 in)
Weight
180 g (6.3 oz)
optical magnification
200X, 400X, 200/400X
Focus control
adjustable, in-probe
cord length
240 cm (94-in)
connector
4-pin Hirose™ male
camera type
1/3-in cmos sensor
Video output
ntsc or PaL
light source
Blue LEd, 100,000+ hour life
lighting technique
coaxial
Power source
From the display device or UsB module
Specifications
Focus Control
Magnification Control
(Dual-mag probes only)
inspection tip
Barrel Assembly
cHaPter 3
FBP Probe microscope
