JDS Labs Model # O2+ODAC
Pg. 1 of 2
ObjODAC Combo
Operating Instructions
1.
Connect AC power adapter to the 14-20VAC
power jack
.
2.
Connect USB cable between your computer and the
USB jack
on back side of the O2+ODAC.
3.
Connect headphones to the
Output
jack.
4.
Press the
Power
button to power on the Objective2. Keep volume low until music is playing.
5.
Slowly raise the Objective2’s volume knob to an appropriate listening level. See tips below.
Analog Input: Connecting a cable to the Objective2’s 3.5mm Input jack bypasses the ODAC.
Initial Computer Setup
ODAC requires no drivers in Windows, Mac OS X, or Linux. Most operating systems immediately recognize and
set ODAC as the default playback device. To manually select the playback device in:
o
Windows XP:
Double click volume icon in taskbar. Click ‘Options’,
‘Properties’, choose ‘ODAC’.
o
Windows Vista/7:
Right click volume icon in taskbar, click 'Playback Devices', set
'ODAC' as default device. Suggested Properties (Right click
ODAC "Speakers" icon):
•
Enhancements: Check "Disable all enhancements"
•
Advanced: 24 bit, 96000 Hz
o
Mac OS X:
Ensure ‘ODAC’ is selected from ‘Audio Devices’
Listening Tips
For maximum signal fidelity, keep ODAC digital volume set at 100% at the computer. Only control
volume from the O2+ODAC.
Set output to 24-bit, 96 kHz
High-performance audio devices can produce dangerously loud music. Be sensible and listen safely:
www.hearingloss.org
Thank you for purchasing the O2+ODAC. If you have additional questions or comments, feel free to write to:
