J D S L A B S . C O M
6
T R O U B L E S H O O T I N G
Amplifier does not turn on
Cause:
Missing or loose power adapter connection
Solution:
Firmly connect AC adapter to 16VAC power jack
Internal LED flashes, then turns off
Cause:
Wrong power adapter detected
Solution:
See Power Adapters section below
P O W E R A D A P T E R S
ATTENTION:
Incorrect power adapters can result in capacitor
explosion hazards and device damage. Only use the power
adapter included with your EL DAC:
Type: AC-to-AC Transformer
Output Voltage: 16 VAC
Current: Minimum 1000mA
Connector: 2.1x55.mm (ID x OD)
No sound in one channel
Cause:
Bad cable, or incorrect computer settings
Solution:
Check balance settings; try another headphone or RCA cable.
Some Mac OS X systems will pan audio to the Left channel upon initial
connection of a DAC. User must restore balance to center.
