27
26
INSERTING/REMOVING THE COMPACT FLASH(CF) CARD
Be sure to
turn off the power of the camera
when inserting or removing the CF card into or from
the camera. Otherwise, the data in the card may be lost or the card may be damaged.
If you insert or remove the CF card when the camera is turned on, re-format the CF card after trans-
ferring the data from the card to your computer if the data is safe.
INSERTING THE CF CARD
1
1 Open the card-slot door as shown in the figure.
2
2 Insert the CF card into the card slot.
• Position the flat edge side of the card towards the camera lens and insert the
card with the signal part facing down until the card stops.
• Insert the card straight. Do not insert it on the angle.
• If the card is stopped halfway, check the direction of the card. Forcing the
card into the slot may damage the card or the camera.
INSERTING THE BATTERIES - CONT'D
AUTO POWER OFF
To save the battery power, This camera will turned off automatically if it is not operated more than 3
minutes. (Auto Power Off function)
To operate the camera, slide the power switch to turn on the camera again.
• When using the batteries, the time for the auto power off function can be changed to a minute, 5
minutes, 10 minutes or 30 minutes. See page 115 for details.
• When using the DC adapter (sold separately), this camera will turn off automatically if it is not oper-
ated more than 30 minutes. The time for the auto power off function is fixed in 30 minutes.
USING THE DC ADAPTER (Sold Separately)
We recommend you to use the AC adapter (sold separately) when using the camera indoor where
the AC outlet supplies the power to the camera or when connecting the camera to the personal com-
puter for editing the images.
Be sure to turn off the power of the camera when changing the power supply from the batteries to the
DC adapter or vice versa. Do not change it when the power of the camera is turned on.
1
1 Connect the mini plug of the DC adapter to the DC terminal
of the camera.
• The Shape of the mini plug may vary depending on the DC adapter.
2
2 Connect the power plug of the DC adapter to an AC outlet.
