
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER
WARNING
:
When using an electrical appliance, basic precautions should
already be followed, including the following:
1.
For the first operation, it is advisable to read the manual carefully beforehand and
keep it properly for future use.
2.
Before the first operation, make sure the dust cup or the dust bag is properly
installed.
3.
Make sure the power supply is 220-240V~ 50/60Hz
4.
Do not vacuum water and inflammable material.
5.
Do not vacuum burning material and ashes.
6.
Do not use the machine without a motor protection filter filled.
7.
Please change the dust bag immediately when it was damaged.
8.
Do not store or use the machine close to high temperature places.
9.
Dot not let children use the machine in case of danger.
10. If abnormal noise, smell, smoke or any other failure or breakage is found during
the operation, you should turn off the switch and unplug it. Then, contact with
your service centre for repair. Do not repair by yourself.
11. If the power cord is damaged, it must be replaced by the manufacturer or its
service agent or a similarly qualified person in order to avoid a hazard.
12. This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction concerning use
of the appliance by a person responsible for their safety.
13. Children should be supervised to ensure that they do not play with the appliance.
14. The plug must be removed from the power socket before any maintenance or
replacement.
15. This appliance may be used by children aged 8 years and above and persons
with reduced physical, sensory or mental capabilities or lack of experience and
knowledge if they have been given supervision or instruction concerning safe use
of the appliance and understand the hazards involved. Children should not play
with the appliance. Children should not carry out cleaning and user maintenance
without supervision.
! WARNING!
The plug must be removed from the power socket before any maintenance or
replacement.
If the power cord is damaged, replace it only by the factory or maintenance
centre or similarly qualified persons.