10
Assembly Instructions
Step
9 - Continued
Fittings you will need for this step:
V
(x2)
H
(x2)
To fix the flap
assemblies to the lh end
panel and right
hand end panel
through lh and rh brackets
Firstly, using a screwdriver
insert into . As
shown in ( diag 1 ).
9808
9809
H
H
V
V
d:
H
V
Repeat step 9a - 9e
on the remaining
flap.
(x4)
D`
8320
e:
D
e:
Secure the large rail
0 to left and right
hand bracket using
screws .( diag 4 )
8320
D
D
Fittings you will need for this step:
d:
9808
W
W
H
V
( diag 1 )
( diag 2 )
Now,While one person
lines up the hole in the
brackets with fitting
already inserted in end
panels, the other person
inserts and secures
and . (diag 2 ).
H
V
W
H
W
9809
V
Warning.
Ensure rail is inserted fully
into slot in brackets.
See diag 1,2 and 3.
Warning.
DO NOT OVERTIGHTEN
( diag 1 )
( diag 2 )
( diag 3 )
Position rail into slots.
To ensure the rail fits
correctly into the bottom
slot, push the bracket
on the area as shown
above.
Note the rail now sits
flush up to the slot.
Slot
DO NOT OVERTIGHTEN
( diag 4 )
Warning.
DO NOT OVERTIGHTEN
Warning.
