JD Williams 2 Door Cupboard 044 9426 Series, Assembly Instructions Manual

Page: 12 / 20

Assembly Instructions
11
DIAG 1
DIAG 2
DIAG 3
XX
XX
YY
YY
XX
XX
YY
YY
XX
XX
YY
YY
Step
12
Square up the unit.
IMPORTANT
Ensure a tape
measure is used
to square up unit!
Before securing the back
it is necessary to square
up the unit.
You can do this by
measuring between
XX - XX and YY - YY
ensuring these are the
same (DIAG 1).
If they are not (DIAG 2)
Apply slight pressure as
indicated (DIAG 3) until
they are the same.
M
XX
YY
YY
XX
M
x6
Step 13
Add stability blocks.
Slide the thin point of the
stability blocks
between the back panel
and the grooves.
Once inserted fully,
tighten the screws in the
stability blocks.
M
1490
M
M
M
M
M
M
Stand the unit upright,
2 people required.
IMPORTANT!
Please ensure that the
stability blocks are used
correctly to secure the
back panel in place.