CONNECTION TO THE MAINS SUPPLY
Please check that the voltage marked on the product corresponds with your supply
voltage.
This product is fitted with a 13A plug complying to BS 1363. If this plug is unsuitable
or needs to be replaced, please note the following:
Your appliance is fitted with a two cord mains lead as it is double insulated anddoes
not require an earth.
IMPORTANT:
The wires in the mains lead are coloured in accordance with the following code:
BLUE NEUTRAL (N)
BROWN LIVE (L)
FOR UK USE ONLY
– Plug fitting details (where applicable).
The wire colored BLUE is the NEUTRAL and must be connected to the terminal
marked N or colored black.
The wire colored BROWN is the LIVE wire and must be connected to the terminal
marked L or colored RED.
On no account must either the BROWN or BLUE wire be connected to the EARTH
terminal.
Always ensure that the cord grip is fastened correctly. If a 13A fused plug is used it
must be fitted with a 13A fuse conforming to BS1362 and be ASTA approved.
If in doubt consult a qualified electrician who will be pleased to do this for you.
NON-REWIRABLE MAINS PLUG
If your appliance is supplied with a non-rewireable plug fitted to the mains lead, you
will find that it incorporates a fuse, the value of which is indicated on the case of the
plug or the fuse carrier. Should the fuse need replacing you must use an ASTA
approved one (conforming to BS 1362 of the same rating). If the fuse cover is lost,
the plug must not be used until a replacement is obtained from an electrical supplier.
