ASSEMBLY
2
.
Once the side bolts are hand tight, you will need to use the (2) other
provided 3/8“ button heads and nuts and assemble up through the bottom
of the skid into the frame through the (2) slots, as shown in the orientation
below. Depending on what year your Jeep is will depend on what set of
slots you will need to use of them bottom of the skid. The inside slots that
are shown are for a 12-18, and if you have a 07-11 then you will need to
use the outside set of slots.
Summary of Contents for JKSD-FL
Page 3: ...INCLUDED PARTS 1x...
