Sensor Calibration
- Calibrate the Mark and Exit sensors.
Continuous Ticket Printer Test -
Printer will print one ticket after
another (Previously printed ticket does not have to be removed.).
Sensor Adjustment Data
- Mark sensor and Exit sensor
adjustment data is printed on ticket.
Test Pattern and Version Information
- A checker pattern,
model name and version information is printed on ticket. This
function can be used to test print quality. This same test can be
performed by pushing the white button next to the DIP switches.
Motor Function Test
- Test forward and reverse operation of
the motor.
The green LED #1 is located on the left
side of the printer, and indicates when the
printer is powered up.
LED # 2 and 3
Rotary Switch
The rotary switch is used to increase or de-
crease the darkness of the image on the ticket.
Lower numbers indicate a darker image.
LED #1
9
LED #2 (Red) and #3 (Green) light when the
macine is turned on. After initiation, LED #2
goes out. It will light up if the print head is
open while the printer is turned on.
-
