12
Please note that the handle fitted is dependent on the size of the chair. You
therefore need to ensure the size label on the handle matches the size of the
chair being used.
!
•
Position the seating unit above
the interface plate, lining up the
locating lugs (B) with the cut outs
(A) on the interface plate.
•
Carefully lower the seat onto
the interface plate ensuring the
locating lugs (B) slide into the cut
outs on the interface plate (A).
•
Push the seating unit inwards
towards the back of the chair until
the locating lugs ‘click’ into place.
•
Ensure the seat is securely
located on the base before using.
View of seat engaged with the base.
View from the side showing the seating unit
lugs lowering into the interface plate cut outs.
Always ensure that the locating lugs are fully engaged and that seat is
securely locked in place and secure on the base before using.
!
When mounting the seating system to a base for the first time, or when an
adjustment has been made to the size of the system, a stability assessment
should be carried out prior to use of the equipment.
!
Mounting of Seating Unit
•
There are 2 cut outs on the top
of the interface plate (A) which
are for locating lugs (B) on the
seating unit to fit into.
B
Always ensure the base is stable and that the brakes are applied before
mounting the seating unit.
!
A