JCM ivizion ld, Operation And Maintenance

Page: 68 / 158

P/N 960-100929R_Rev. 7 {EDP #148849} © 2017, JAPAN CASH MACHINE CO., LTD.
4 - 1 2
Section 4 iVIZION® Series Next-Generation Banknote Acceptor Unit Disassembly/Reassembly
6. Remove the two (2) mounting Screws (Figure 4-
42 e
1
& e
2
) securing the Upper UV Sensor in
place (Figure 4-42 f ), and drop it down and off the
Upper Validation Section.
CIS/CIS FPC/Lower UV Sensor &
Lower UV FFC Removal
To remove the CIS, the CIS FPC, the Lower UV
Sensor and the Lower UV FFC proceed as follows:
1. Remove three (3) BG 85A Head Mounting
Screws (Figure 4-43 a
1
, a
2
& a
3
) and release the
four (4) Clip-tab Stops (Figure 4-43 b
1
to b
4
) on
the
iVIZION
BG 85A Head.
2. Remove the
iVIZION
BG 85A Head (Figure 4-
43 c ) up and off of the Validation Unit.
3. Remove two (2) mounting screws (Figure 4-44 a
1
& a
2
) securing the Lower Validation Section in
place (Figure 4-44 b ) and remove it up and off the
Validation Unit.
Figure 4-42 CIS, Transmissive Light & Upper
UV Sensor Removal
Figure 4-42 CIS, Transmissive Light & Upper UV
Sensor Removal
a
4
f
d
b
a
2
a
1
a
3
c
1
c
2
e
2
e
1
Figure 4-43 iVIZION BG 85A HEAD Removal
Figure 4-43 iVIZION BG 85A HEAD Removal
a
1
a
3
b
1
b
2 b
3
b
4
c
a
2