manualshive.com logo in svg

JCM iPRO-100-SH2-RC, Operation And Maintenance Manual, Page: 24 / 146

Share
Download
JCM iPRO-100-SH2-RC Operation And Maintenance Manual Download Page 24

P/N 960-000164R_Rev. 3 {EDP #213631} 

© 2018, JAPAN CASH MACHINE CO., LTD. 

1 - 8

Section 1

iPRO-RC™ Series Banknote Recycler 

General Information

Unit Dimensions

Entire Unit Outside Dimensions

Figure 1-6 illustrates the iPRO-RC™ Unit with the Bezel, Bezel Spacer and 400 Note Cash Box outside 

dimensions.

Figure 1-7 illustrates the iPRO-RC™ Unit with the Bezel, Bezel Spacer, Lock Unit and 400 Note Cash 

Box outside dimensions.

Figure 1-6 

iPRO-RC Banknote Recycler Stan-

dard Unit with Bezel Outside Dimensions 

Figure 1-6 

iPRO-RC Banknote Recycler Standard Unit with Bezel Outside Dimensions

UBA/iPRO Bezel Unit

Bezel Spacer

MAX DEPTH7mm

NOTE: All dimension are in millimeters

MAX DEPTH7mm

Figure 1-7 

iPRO-RC Banknote Recycler Stan-

dard Unit with Bezel, Lock Unit and Outside 
Dimensions 

Figure 1-7 

iPRO-RC Banknote Recycler Standard Unit with Bezel, Lock Unit and Outside Dimensions

UBA/iPRO Bezel Unit

Bezel Spacer

MAX DEPTH7mm

NOTE: The Lock Unit is available 

for installation on either the right 

or left side of the Unit.

NOTE: All dimension are in millimeters

Summary of Contents for iPRO-100-SH2-RC



















































































































































Reviews:

No comments