QR - Preventive Maintenance
DBV
tm
200:
Unit and Transport Unit
• Replace belts if frayed, slick, and/or worn.
• It is important to keep the bill path, rollers, and belts clean.
The sensor lenses are transparent, and made of a polymer
material. Handle them with care.
To clean the lenses, use a lint-free cloth and a mild non-abra-
sive detergent, such as liquid dish soap mixed with water.
Do not use alcohol for cleaning
Important Note: After wiping, inspect the lenses to ensure
that none of the lenses have been moved out of position, or
are not flush with the bill path.
Note: JCM does not recommend cleaning cards, cleaning
pads, or cleaning solutions of any kind
CASHBOX PREVENTIVE MAINTENANCE (P/M)
Do periodic PM on the cashboxes to ensure proper operation.
Use compressed air via can or air compressor to blow out the
paper fibers, and any other debris that builds up over time.
Check the belts and all moving parts for wear and proper posi-
tioning. If this unit does not operate properly, it can cause bill
jams.
After completing the PM, we recommend calibration.
“DBV
TM
200 Units”
