COD. SU7GOBIO/1.0
GOBIO
7
A:
Start swipe with the top knuckle above the sensor strip.
B:
Swipe finger straight down keeping firm contact with the sensor.
C:
The scan should end at the tip of finger.
INCORRECT
D:
Do not bend finger during swipe as this will only scan the tip of your finger.
E:
Swipe fingerstraight down, not at an angle.
F:
Swipe flat, not tilted or rolled to one side.
How to avoid damaging the biometric reader?
Keep always the protective cover closed when the transmitter is not used. Avoid scratching the surface when it is used.
For avoiding a bigger consumption of the biometric reader, keep always the protective cover closed when it is not used.
JCM TECHNOLOGIES, S.A.
declares herewith that the product
SU7GOBIO
, complies with the requirements of the
1999/5/ CEE R&TTE Directive, insofar as the product is used correctly
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) This device must accept interference received, including interference that
may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority
to operate the equipment.
CE DECLARATION OF CONFORMITY
See web www.jcm-tech.com
