jcm-tech BASE500, User Manual

Page: 7 / 16

Settings/start-up
If you have acquired the LINK module as part of an M2M kit, the module
comes from the factory prelinked to the Router. DO NOT ALTER THE WIFI
PARAMETERS.
WIFI
To communicate with Cloud Assistant, the LINK module has to be connected
to a WIFI Router with internet access by WPS (only compatible routers) or
manually.
WIFI: WPS
To set up your device via WIFI with WPS follow these steps:
1. Put your router into WPS mode (consult the manual of your router)
2. Press the WPS button of the
LINK device (for less than 2
seconds).
The LINK module indicates that it
is in WPS mode through the state
of the LED indicators
(indicators: ST fix green, NW blink-
ing green & IN off)
3. The linking process starts auto-
matically and ends when all 3
LEDS show steady green.
jcm technologies
7