P/N 960-100189R_Rev. 4 {EDP #148850}
© 2016, JAPAN CASH MACHINE CO., LTD.
1 - 2
Section 1
VEGA™ Series Banknote Validator
General Information
Product Description
Model Descriptions
Table 1-1 lists the product model number descrip-
tions.
Type Description
Table 1-2 lists the product type number descrip-
tions.
Precautions
Symbols in Figure 1-2 are defined as follows:
1. (Type 1) Do not insert a torn, folded, or wet
Banknote; it may cause a jam inside the unit.
2. (Type 2) Do not expose the unit to water. The unit
contains several precision electronic devices that
can be damaged if water or any liquid is sprayed
or spilled into the unit.
3. (Type 3) Do not install the unit in a dusty envi-
ronment. Dust may affect/degrade the sensor’s
performance.
User Cautions
Careful measures were taken in the design of this
product to ensure its quality; however, the follow-
ing cautions pertain to all users and should be fol-
lowed for safe operation.
Installation Cautions
The installation Cautions are defined as follows:
1. This unit is not designed for outdoor installation.
Be sure the Host Machine contains enough pro-
tection to avoid wet or dusty conditions when
installing it in both open-air and indoor spaces.
Table 1-1
VEGA Model Number Specifications
N
o
Model: VEGA - * * * - *** - ****
N
o
(1) (2,3,4) (5) (6)
(1) Product Series Name
(2) CPU Board Type
1 = Standard
(3) Durability
0 = Standard
(4) SUB
Board
0 = 12V DC Power (NO Magnetic Sensor)
1 = 12V DC Power / Magnetic Sensor (W)
2 = 24V DC Power / NO Magnetic Sensor
3 = 24V DC Power / Magnetic Sensor (J)
4 = 24V DC Power / Magnetic Sensor (W)
5 = 12V DC Power / Magnetic Sensor (J)
(5) Stacker
Type
SH = Downward horizontal stacking
SU = Upward vertical stacking
SD = Downward vertical stacking.
(6) Recycle (Option)
*
None = No Recycler
RC1 = Recycler Featured (1 Drum)
RC20 = Recycler Featured (2 Drums/Standard)
RC21 = Recycler Featured (2 Drums/Vehicle Specification)
*. Optional recycler units details are explained in each Operation and
Maintenance Manual. Refer to VEGA-RC Operation and Maintenance
Manual for using the RC1 or the VEGA-RC Twin Operation and Main-
tenance Manual for using the RC20/RC21.
Table 1-2
Model Number Specifications
N
o
Model: **** - * * ** * - ** - **
N
o
(1) (2,3,4,5) (6) (7)
(1) Country Code
Refer to the “Software Information Sheet”
(2) Cash Box
3 = Standard Box
A = Large Box
(3) Lock
0 =Thumb Lock
(4) Bezel
01 = SH 68mm (EUR)
02 = SH 76mm (GBR/SCO/NIRL)
03 = SH 71mm (RUS)
04 = SH 77mm (JPN)
05 = SH 67mm (USA)
11 = SH 68mm (EUR) + Metal Bezel (EUR)
21 = SH 71mm Long Bezel (TYPE 3)
22 = SH 71mm Long Bezel (TYPE 4)
N1 = SU/SD 68mm (EUR)
N2 = SU/SD 76mm (GBR/SCO/NIRL)
D1 = SU/SD 67mm (USA)
D2 = SU/SD 71mm (RUS)
D3 = SU/SD 68mm (EUR)
R1 = SU/SD 71mm (RUS)
(5) Box Access
F = Front Access
B = Rear Access
(6) Option
00 = NO Option
01 = Frame Key
02 = Bezel Protector
03 = Frame Key + Bezel Protector
(7) Interface
I4 = 4 Types
Table 1-2
Model Number Specifications
N
o
Model: **** - * * ** * - ** - **
N
o
(1) (2,3,4,5) (6) (7)
Figure 1-2
Type 1 Type 2 Type 3
Figure 1-2
Precautionary Symbols
