JCM GLOBAL UBA Pro Series, Operation And Maintenance Manual

Page: 84 / 132

P/N 960-000211R_Rev. A © 2020, JAPAN CASH MACHINE CO., LTD.
6 - 1 4
Section 6 UBA™ Pro Series Universal Banknote Acceptor Calibration and Testing
Entrance Motor Speed Test (Forward)
To perform the Entrance Motor Speed Test in the for-
ward rotation, proceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select “
ENTRY_MOTOR_FWD_TEST
” (Figure
6-66 a ).
3. Click the “
Start
” Screen Button (Figure 6-
66 b ).
4. The measured time will appear in the
“Entrance
Motor
” area (Figure 6-67 a ) on the Screen.
5. Confirm that the motor speed is in the acceptable
range: 550mm/sec to 1200mm/sec.
6. Click the “
Stop
” Screen Button (Figure 6-
67 b ) to end the test.
Entrance Motor Speed Test (Reverse)
To perform the Entrance Motor Speed Test in the
reverse rotation, proceed as follows:
1. Launch the Performance Test Program (see
page 6-8).
2. Select “
ENTRY_MOTOR_REV_TEST
” (Figure
6-68 a ).
3. Click the “
Start
” Screen Button (Figure 6-
68 b ).
4. The measured time will appear in the “
“Entrance
Motor
” area (Figure 6-69 a ) on the Screen.
5. Confirm that the motor speed is in the acceptable
range: 550mm/sec to 1200mm/sec.
6. Click the “
Stop
” Screen Button (Figure 6-
69 b ) to end the test.
Figure 6-66 Entrance Motor Speed Test
Figure 6-66 Entrance Motor Speed Test
(Forward) 1
a
b
Figure 6-67 Entrance Motor Speed Test
Figure 6-67 Entrance Motor Speed Test
(Forward) 2
a
b
Figure 6-68 Entrance Motor Speed Test
Figure 6-68 Entrance Motor Speed Test
(Reverse) 1
a
b
Figure 6-69 Entrance Motor Speed Test
Figure 6-69 Entrance Motor Speed Test
(Reverse) 2
b
a