JCM GLOBAL UBA Pro RT Series, Operation And Maintenance Manual

Page: 66 / 196

P/N 960-000213R_Rev.A © 2020, JAPAN CASH MACHINE CO., LTD.
4 - 2
Section 4 UBA Pro RT/RQ™ Series Banknote Recycler Disassembly/Reassembly
RQ Transport Unit Removal
To remove the Transport Unit in the RQ Transport,
proceed as follows:
1. Press up on the Front Transport Unit’s Release
Lever (Figure 4-3 a ).
2. Pull down the Front Transport Unit (Figure 4-3 b )
as illustrated by the Arrow.
3. Press down on the Transport Unit’s Release
Lever (Figure 4-4 a ).
4. Pull down and remove the Transport Unit (Figure
4-4 b ) as illustrated by the Arrow.
RT Frame Unit Removal
To remove the RT Frame Unit, proceed as follows:
1. Remove the seven (7) Screws (Figure 4-5 a
1
through a
7
).
2. Remove the two (2) Screws (Figure 4-6 a
1
& a
2
).
3. Slide and remove the Frame Rear Cover (Figure
4-6 b ) as illustrated by Arrow.
4. Unplug the single (1) Connector (Figure 4-7 a ).
5. Unplug the two (2) FPC Harnesses (Figure 4-7 b
1
& b
2
).
6. Remove the two (2) Screws (Figure 4-7 c
1
& c
2
).
Figure 4-3 RQ Transport Unit Removal 1
Figure 4-3 RQ Transport Unit Removal 1
b
a
Figure 4-4 RQ Transport Unit Removal 2
Figure 4-4 RQ Transport Unit Removal 2
a
b
Figure 4-5 RT Frame Unit Removal 1
Figure 4-5 RT Frame Unit Removal 1
a
1
a
2
a
3
a
4
a
5
a
7
a
6
Figure 4-6 RT Frame Unit Removal 2
Figure 4-6 RT Frame Unit Removal 2
b
a
1
a
2