P/N 960-000186R_Rev. A {EDP #253995}
© 2016, JAPAN CASH MACHINE CO., LTD.
8
RDM-100™ Series Retail Deposit Module
4. Attach the Cash Box Transport Path with the four
(4) M4 Screws.
Top Side Mounting
When the top side mounting is preferred, attach
the Cash Box Transport Path by the four (4) M4
Screws (Figure 9
a
1
to
a
4
) from the top side of the
Cash Box ceiling.
Bottom Side Mounting
When the bottom side mounting is preferred,
insert the four (4) M4 Screws M4 Screws (Figure
10
b
1
to
b
4
), of the proper length, from the bottom
side of the Cash Box Ceiling securing the Cash
Box Transport with Nuts (Figure 10
a
1
to
a
4
) to
the top side.
5. Place the RDM-100 Unit to the home position.
6. Confirm that the RDM-100 Unit is firmly
installed without backlash.
7. Slide the RDM-100 Unit forward and backward
and confirm the movement is smooth.
This completes the RDM-100 Unit Installation.
Figure 9
Figure 9
Top Side Mounting
a
1
a
3
a
4
Figure 10
Bottom Side Mounting
a
1
a
3
a
4
b
1
b
2
b
3
b
4
NOTE: The Screw Length is
considered as the Cash Box Ceiling
thi approximately 7mm.
Figure 11
Home Position
Figure 12
Figure 12
Latch Plate Positioning
a
NOTE: Re-adjust the Latch Plate
position in order to eliminate
movement of the Unit by tightening
two (2) Screws (Figure 12
a
)
Figure 13
Latch Plate Positioning
