background image

4

TH52002C-TH53003E-TH56002A 

Instruction & User Manual

INTRODUCTION

For your safety, please read this manual 
before using any lifting equipment 
ensuring you fully understand its 
operation and the safety procedures to 
be observed.

 Ensure this manual is retained 

for future reference and that new users of 
this product read and understand the content 
before they use the product.

SAFETY 
PRECAUTIONS

Failure to comply with these instructions can 
cause serious injury and damage to the vehicle. 
If you are in any way unsure, do not attempt 
to use this product and consult a qualified  
mechanic.

WARNING!

1.  Read and understand instruction manuals 

fully before use. Use only as specified.

2.  Never overload

 

these jack stands by 

exceeding the rated safe working load.

3.  Check vehicle owner’s manual for gross 

vehicle weight.

4.  Use no more than one pair of stands.
5.  Ensure all body parts are kept clear of 

the jack and vehicle when positioning and 
removing the jack stands.

6.  After lifting the vehicle, support 

immediately with properly rated jack 
stands.

7.  Never work on or under a vehicle without 

using properly rated jack stands.

8.  Only use on solid, even and level ground 

with the wheels chocked, the vehicle in 
gear and its handbrake on.

9.  Always ensure that the load is centred and 

secure on the jack stand top saddle. Off 
centre loads can become unstable and slip 
resulting in possible damage or injury.

10.  Ensure that each stand is securely located 

under a strong, stable point on the vehicle: 
consult the vehicle owner’s manual for 
guidance.

11.  Ensure vehicle jacking and support points 

are in good, sound condition with no 
corrosion etc.

12.  Do not attempt to move or dolly the 

vehicle whilst on the jack stands or jack.

13.  Do not attempt to modify these jack 

stands in any way.

14.  Upper and lower columns to be used as a 

pair as supplied.

15.  Do not attempt to use if you suspect a 

fault.

16.  Do not start the vehicle in its raised 

position.

17.  Do not attempt to enter the vehicle and 

ensure all passengers are out of the vehicle 
when using this product.

18.  Take care when using on a three-wheeled 

vehicle or trailer.

Summary of Contents for TH52002C









Reviews: