5
SPECIFICATIONS :
SENSIBILITE/IMPEDANCE :
DJ/MICRO
3mV/1 Kohms
PHONO
3mV/51 Kohms (RIAA)
CD/LIN
150mV/100 Kohms
NIVEAU DE SORTIE :
MASTER (sortie maxi 8V)
775mV/600ohms asymétrique
REC (Sortie maxi 8V)
380 mV/600 ohms
PHONES (Sortie maxi 420 mV)
380 mV/80 ohms
REPONSE EN FREQUENCE :
20 Hz
≈
20KHz
±
0.5dB
(RIAA
±
2dB)
DISTORTION HARMONIQUE TOTALE
0.01%
SEPARATION STEREO
>
45dB
RAPPORT SIGNAL/BRUIT:
DJ MIC
80dB
PHONO
70dB
CD/LINE
85dB
CONTROLE DE TONALITE :
Boost/cut@center Frequency
±
12dB@100Hz, 1K, 10 KHz
DIMENSIONS
310 x 236 x 107mm
POIDS
3,4Kg
6
1. MICrophone Input:
A Combination XLR & 1/4“ jack sockets mounted on the front face of
the mixer for connecting your microphone and offer both balanced or
unbalanced microphone connections.
2. MASTER Level:
This rotary control sets the level present at the MASTER unbalanced
RCA jack outputs.
3. DJ Channel LEVEL Control:
Controls the overall level of the DJ channel being mixed onto the
Master outputs.
4. GAIN Controls:
Correct setting of the controls for input Gain for every channel is
crucial for getting a good, strong signal without noise or distortion.
5. Channel Level Control
:
The channel fader adjusts the overall volume of the channel. The
faders of the stereo channels control both left and right signal at
same time.
6. Crossfader ASSIGN Switch
:
Any of the four music channels can be assigned to either side of the
crossfader by the setting of these switches.
NOTE: If the same channel is assigned to both sides of the crossfader
at either extreme that channel will be muted but the channel will be
live when the crossfader at it’s center position. This setting can give
the effect of ‘fader dub fading’ when crossfader is used from it‘s
center to either extreme.
7. Removeable CROSSFADER:
This 45mm crossfader is fully assignable to any of the four main music
channels set by the ASSIGN switches.
8 PHONES:
This is a 1/4” stereo jack socket mounted on the front face of the
mixer for you to attach your headphones.
9. CUE Switch
:
This switch determine which source is heard in the headphones.
10. Headphone LEVE Control:
This control varies the volume in your headphones, the volume of the
signal heard through the headphones.
