
Maintenance
Electrical System
75
9831/3200-3
75
Electrical System
General
Check (Operation)
Make sure all of the electrical equipment operates correctly, for example:
•
Switches
•
Warning lights
•
Beacon
•
Alarms
•
Horn
•
Hourmeter/display
•
Battery
•
Lights
All defective equipment must be repaired before the machine is used.
Check (Condition)
(For: Lead Acid Battery)
WARNING
Battery electrolyte is toxic and corrosive. Do not breathe the gases given off by the battery. Keep
the electrolyte away from your clothes, skin, mouth and eyes. Wear safety glasses.
DANGER
Batteries give off explosive gases. Keep flames and sparks away from the battery. Do not smoke
close to the battery. Make sure there is good ventilation in closed areas where batteries are being used
or charged. Do not check the battery charge by shorting the terminals with metal. Use a hydrometer or
voltmeter.
CAUTION
Understand the electrical circuit before connecting or disconnecting an electrical component. A
wrong connection can cause injury and/or damage.
Examine the electrical circuits regularly for:
•
Damaged connectors
•
Loose connections
•
Chafing on the wiring harnesses
•
Corrosion
•
Missing insulation
•
Incorrect routing of the wiring harnesses
•
Insulation covers on battery terminals and leads
Do not use the machine if one or more of these faults are found. You must make sure that the electrical circuit
is repaired immediately.
Battery
Clean
(For: Lead Acid Battery)
WARNING
Keep metal watch straps and any metal fasteners on your clothes, clear of the positive (+)
battery terminal. Such items can short between the terminal and nearby metal work. If it happens you can
get burned.
1. Make the machine safe.
Refer to: Maintenance Positions (Page 58).
Summary of Contents for S1530E
