background image

Section 2 - Care and Saftey

Safety Notices

Safety Check List

2-6

2-6

9803/9910-2

!M

DANGER

Working Platform

Using the machine as a working platform is 
hazardous; you can fall off and be killed or injured. 
Never use the machine as a working platform.

5-1-5-9

!M

WARNING

Machine Safety

Stop work at once if a fault develops. Abnormal 
sounds and smells can be signs of trouble. Inspect 
and repair before resuming work.

8-1-2-3

!M

WARNING

Touching hot surfaces can burn skin. The engine and 
machine components will be hot after the unit has 
been running. Allow the engine and components to 
cool before servicing the unit.

10-1-1-40

!M

WARNING

Travelling at High Speeds

Travelling at high speeds can cause accidents. Do not 
reverse in a high gear with full throttle. Always travel 
at a safe speed to suit working conditions.

INT-5-3-3

!M

WARNING

The engine has exposed rotating parts. Switch OFF the 
engine before working in the engine compartment. Do 
not use the machine with the engine cover open.

5-2-6-5

!M

WARNING

You could be killed or seriously injured if you operate 
a machine with a damaged or missing ROPS/FOPS. If 
the Roll Over Protection Structure (ROPS)/Falling 
Objects Protection Structure (FOPS) has been in an 
accident, do not use the machine until the structure 
has been renewed. Modifications and repairs that are 
not approved by the manufacturer may be dangerous 
and will invalidate the ROPS/FOPS certification.

INT-2-1-9_6

!M

WARNING

Visibility

Accidents can be caused by working in poor visibility. 
Use your lights to improve visibility. Keep the road 
lights, windows and mirrors clean.

Do not operate the machine if you cannot see clearly.

5-1-4-7

!M

WARNING

Keep Your Hands and Feet Inside the Vehicle

When using the machine, keep your hands and feet 
clear of moving parts. Keep your hands and feet within 
the operator compartment while the vehicle is in 
motion.

13-1-1-17

!M

WARNING

Controls

You or others can be killed or seriously injured if you 
operate the control levers from outside the machine. 
Operate the control levers only when you are correctly 
seated.

0179_2

!M

CAUTION

Passengers

Passengers in or on the machine can cause accidents. 
Do not carry passengers.

INT-2-2-2_1

!M

WARNING

Fires

If your machine is equipped with a fire extinguisher, 
make sure it is checked regularly. Keep it in the correct 
machine location until you need to use it.

Do not use water to put out a machine fire, you could 
spread an oil fire or get a shock from an electrical fire. 
Use carbon dioxide, dry chemical or foam 
extinguishers. Contact your nearest fire department as 
quickly as possible. Firefighters should use self-
contained breathing apparatus.

INT-3-2-7_2

Summary of Contents for JZ140












Reviews: