background image

SAFETY NOTICE

Prior to use carry out the necessary risk assessment considering the people who 
could be at risk, the level of risk and the precautions required to control the risk.

GENERAL

Ensure the worklight is correctly charged before initial use
DO NOT cover or block the lens during use
DO NOT shine the product directly into the eyes of people or animals
DO NOT allow children to use the worklight
DO NOT handle or move the worklight while it is being charged
DO NOT use the worklight if you suspect it is damaged
DO NOT place the product in or near naked flames
DO NOT open the equipment or touch any of the internal parts
DO NOT open the battery pack
DO ensure the worklight is unplugged and allow to cool before attempting  
cleaning and maintenance

BATTERY

WARNING!

 To reduce the risk of fire or burns:

DO NOT attempt to open, disassemble, modify or service the battery
DO NOT expose to temperatures below 10ºC or above 40ºC
DO NOT crush, puncture, short external contacts or dispose of in fire or water
DO NOT dispose of with regular waste - dispose of the old batteries in  
accordance with local authority battery regulations
DO NOT cover the battery while charging
Ensure the charger is switched off and disconnected from the worklight before 
attempting to open the lamp unit
If the electrolyte in the cells comes into contact with the skin, wash thoroughly 
with soap and water
If the electrolyte in the cells comes into contact with the eyes, rinse thoroughly 
with cold water and seek immediate medical attention
The worklight should be turned off during charging to prolong battery life

Summary of Contents for JCB-WL-POCKET II







Reviews: