background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092  

If damaged, have the power 
tool repaired before use. 

Many 

accidents are caused by poorly 
maintained power tools. 

f)  Keep cutting tools sharp and 
clean. 

Properly maintained cutting 

tools with sharp cutting edges are 
less likely to bind and are easier 
to control. 

g)  Use the power tool, 
accessories and tool bits 
etc. in accordance with these 
instructions, taking into account 
the working conditions and the 
work to be performed. 

Use of the 

power tool for operations different 
from those intended could result 
in a hazardous situation.

 

5. Service

a) Have your power tool serviced 
by a qualified repair person using 
only identical replacement parts. 

This will ensure that the safety of 
the power tool is maintained.

Hammer Safety 
Warnings

1.  Wear ear protectors. 

Exposure 

to noise can cause hearing loss.

2.  Use auxiliary handle(s), if 
supplied with the tool. 

Loss of 

control can cause personal injury.

3.  Hold power tool by insulated 
gripping surfaces, when 
performing an operation where 
the cutting accessory may contact 

hidden wiring or its own cord. 

Cutting accessory contacting a 
"live" wire may make exposed 
metal parts of the power tool "live" 
and could give the operator an 
electric shock.

Summary of Contents for JCB-SDS780





















Reviews: