7
JCB-PT5S
Instruction Manual
OPERATION
CHARGING WARNING!
Ensure that you read and fully understand the safety
instruction before use
Charge the battery before use
IMPORTANT!
Ensure the worklight is turned OFF while charging
Connect the USB cable provided to the charging input on the side of the worklight
Connect the USB plug to a USB mains power adaptor (not provided) or a USB charging
port on a computer
The charge indicator will stop flickering once charged
You can then disconnect the USB charging cable
DO NOT shine the product directly into the eyes of people or animals
MAINTENANCE & STORAGE
When not in use store the product in a safe, clean, dry environment out of the reach of
children
Keep the worklight clean from dirt and grease using a damp cloth
DO NOT submerge in water
DO NOT clean the worklight with solvents
Check the product for damage before each use
If the product is not used for a long time , the battery will go into over discharge
protection. To re-activate the battery, charge three or four times for 30 seconds until the
indicator light comes on. Then fully charge the battery as normal.