background image

JCB, SO53 3LE
www.JCBDIY.com
Customer Helpline 0333 0143092  

 

WARNING: 

To be accurate, an estimation of exposure level in the actual conditions 

of use should also take account of all parts of the operating cycle such as the times 

when the tool is switched off and when it is running idle but not actually doing the job. This 
may significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where 
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10

o

C or less.

Plan your work schedule to spread any high vibration tool use across a number of 
days.

ACCESSORIES

We recommend that you purchase your accessories from the same store that 
sold you the tool. Use good quality accessories marked with a well-known brand 
name. Choose the type according to the work you intend to undertake. Refer to the 
accessory packaging for further details. Store personnel can assist you and offer 
advice.

Pair spare planer blades 

   

2

Parallel guide 

   

1

Rebate guide 

   

1

Spanner 

  

1

Dust bag 

1

Dust cover 

1

Summary of Contents for JCB-PP1050





















Reviews: